Ahuja AWM-700U2 UHF Dual Handheld Wireless Microphone
- Brand: Ahuja
- Model: AWM-700U2
- Type: UHF Wireless Frequency
- 2 Hand held Wireless Microphone
- Origin: India
- Genuine Products
Call for PriceAhuja AWM-700U2 UHF Dual Handheld Wireless Microphone
Call for PriceAhuja SCM-20XT 15-Watts Indoor/Outdoor Column Speaker
Input Power 15W RMS, 23W Max. Power Taps 15/10/5/2.5W Voltage 100V Frequency Response 150-10,000Hz SPL at 1kHz 92dB/1W/1m Speakers 2 × 152.4 mm (6”) × 101.6 mm (4”) Dimensions W150× H465× D130 mm Weight 2.70kg ৳ 5,000.00Ahuja SUH-15XT Outdoor Horn Speaker
BRAND: Ahuja
– MODEL: SUH 15XT
– INPUT POWER: 15W RMS/23W Max.
– POWER TAPS: 15/10/5/2.5W
– IMPEDANCE: 670/1k/2k/4k?
– FREQUENCE RESPONSE: 275-7,000Hz
– SPL at 1kHz 106dB/1W/1m, 118dB/15W/1m
– DIMENSIONS (L293) mm; 250 x 145 x 90mm (DxHxT)
– WEIGHT; 1.89kgs(3.9lbs.)৳ 3,700.00Ahuja SUH-15XT Outdoor Horn Speaker
৳ 3,700.00Ahuja CTP-10DX Unidirectional Condenser Tie-Clip Microphone
- Brand: Ahuja
- Type: Lavaliers
- Purpose: Interviews and Recordings
- Model Name: CTP-10DX
- Miniature unidirectional electret condenser lavalier type microphone for lectures, interviews, religious places, recordings etc.
৳ 3,500.00Ahuja UTP-30 Unidirectional Condenser Tie-Clip Microphone
- Brand: Ahuja
- Type: Lavaliers
- Purpose: Interviews and Recordings
- Model Name: UTP-30
- Miniature unidirectional electret condenser lavalier type microphone for lectures, interviews, religious places, recordings etc.
৳ 3,500.00Ahuja AUD-98XLR Unidirectional Dynamic PA Applications Microphone
- Brand: Ahuja
- Model: AUD-98XLR
- High output Neodymium cartridge. Excellent intelligibility & wide frequency response. Attractive appearance.
- Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. twin core shielded low noise cable.
৳ 3,500.00Ahuja CMC-5100 Chairman Unit For Conference System
- Microphone: -63dBV/µbar (7.5mV/Pa)
- Current Consumption: < 50mA Max.
- Mic Auto Switch-Off Time:75 seconds approx.
- Input: Line
- Output: Line, Headphone,
- Speaker Max Input: 300mW
৳ 15,800.00Ahuja AWM-520V2 Dual Hand wireless Microphone
- Elegant and affordable dual channel VHF high band wireless microphones available in different frequencies.
- Handheld dynamic unidirectional transmitter with a three position slide switch and Low Battery LED indicator.
- Stylish table-top receiver with noise squelch circuitry.
- ALC circuit handles high sound pressure levels without distortion.
- Separate output volume controls for both channels on the front panel of the receiver.
- Power ON/OFF switch and 6.3mm (¼”) phone jack for audio output on the rear panel of the receiver.
- Each transmitter operates on 1×9V battery.
- Receiver operates on 12V DC through an AC adaptor, supplied along with the transmitter.
- Ideal for: PA Applications… Stage & Auditoriums… Stadia… Seminar Halls… Places of Worship… Recreation Centres…
৳ 12,500.00Ahuja AWM-520V2 Dual Hand wireless Microphone
৳ 12,500.00AHUJA AWM-490V2 Dual PA Wireless Microphone
- Compact lightweight dual channel VHF wireless microphone system
- Operates at quartz crystal locked VHF high band frequency and available in 5 different frequency groups
- Two microphones with separate frequencies and one non-diversity receiver
- Internal antennas in the microphones and two telescopic antennas in the receiver for clear and distortion free reception
৳ 10,500.00AHUJA AWM-490V2 Dual PA Wireless Microphone
৳ 10,500.00TOA WM-5225 With WT-5810 UHF Wireless Microphone
TOA WM-5225:
Price: ৳ 29,800 Brand: TOA Model: WM-5225 Item: UHF Wireless Microphone Contact No: 01407-555777, 01789-636363 Status: In Stock Warranty: One Year Frequency Range: 576 – 937.5 MHz*, UHF
Channel Selectable: 64 channels (the number of channels may differ from country to country)
RF Carrier Power: Less than 50 mW (Factory preset 10 mW ERP)
Tone Frequency: 32.768 kHz
Oscillator: PLL synthesized
Maximum Input Level: 126 dB SPL
Maximum Deviation: ±40 kHz
Audio Frequency Response: 100 Hz – 15 kHz
Dynamic Range: 95 dB or more (with WT-5800)
Origin: Japan৳ 35,000.00TOA WM-5225 With WT-5810 UHF Wireless Microphone
৳ 35,000.00Ahuja SSA-5000EM 500 WATTS High Wattage PA Mixer Amplifier
- Ahuja SSA-5000EM Price in BD
- 7 Mic & 2 Aux Inputs.
- Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
- Line Input for connecting the output from any external mixer or permitting SSA-5000EM to be used as a Booster Power Amplifier.
- Resettable circuit breaker for protection against overload and short circuit.
- Instant transfer to DC power
- Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
৳ 55,000.00ITC TI-5006S 500W 6 zone mixer amplifer with MP3, 4 mic inputs, 2 line inputs
ITC TI-5006S Bangladesh
TI -1206S/TI-2406S/TI-3506S/TI-5006S * 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .* 6 Channel Partition output, and partition volume independent control.* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.* Mp3 decoding module supports usb / sd / bluetooth / fm radio playback function. With the MP3 remote control, support power off memory function, MIC recording function.* When the alarm generator starts, background music will be closed and6 partition output will automatically open to maximum output volume.* Built in 24V DC power input.* Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled .* T-216 partition control microphone can remotely control partition output, and it can be cascaded up to 6 units.* Audio input with independent control on tone control and total volume control.* A variety of indicator lights (signal, the top of the roof, to protect the LED indicator)* Using fan forcible cooling structure, allowing the machine to work for a long time.* There are 5 priority functions:The first level EMC priority: when input the EMC alarm signal, all the sound source will be turn off, and the 6 Channel partition output will automatically open.Second level: tel /rem mic override mic1-4, line1-2 and bell tone.Third level: built-in alarm generator override bell sound, mic1-4, line1-2, 6 partition output will automatically open.Fourth level: built-in bell tone override mic1-4, line1-2.Fifth level: built-in mic1 override mic2-4, line1-2.* Constant voltage output: 70V, 100V, rated resistance output: 4-16 Ω .SpecificationsRear Panel TI-1206S/TI-2406S/TI-3506S/TI-5006S
Call for Price
Choosing a PA System That Suits Your Needs
Investing in a PA system can be a costly mistake. Even if you have a budget for a basic setup, you might end up spending more than you need. There are several reasons to invest in a quality PA system. For one, it will increase the sound of your show. Another reason is the need to move to a new venue. A PA system is essential for any live performance. So, what should you consider when buying one?
– The types of cables used to connect microphones to PA systems vary widely. In a small system, mics are connected with XLR cables, which carry a balanced signal and can provide 48V phantom power for condenser microphones. For larger systems, 1/4″ jack cables are common but unbalanced and subject to noise when transferred long distances. Higher-powered PA systems typically have Speakon cables, which are rigid and feature a twisting locking mechanism.
– The audio outputs of a PA system must be high-quality, as low-quality audio can damage speakers. The inputs on a PA system must be clear to avoid a loss of quality or a malfunction. A properly functioning PA system will be able to handle the volume level of the audience, while still providing the quality of sound that the audience needs to enjoy the show. So, how do you choose a PA system that suits your needs? You’ll want to choose the right one to enhance the quality of your performance.
The sound source is the most important factor when choosing a PA system. While it’s important to consider the source of sound, the sound quality of a PA system is a crucial consideration. Depending on the type of music you play, you may want to invest in a wireless device or connect your speaker to a wireless microphone. However, if you’re performing a speech performance, then a PA with a high-quality sound source is necessary.
A PA system with constant voltage allows you to install passive wall-mounted volume controls in each speaker. You can install these controls in several locations along the speaker line. Each volume control can control individual speakers or groupings of speakers. By adjusting the volume on a PA system, you can control the overall sound quality of the entire event. With the right audio quality, you’ll be able to enjoy your event and impress your audience. The audio system is an important component of any concert, conference, or exhibition.
While PA systems are fairly simple beasts, you should be sure to look for their connectivity and inputs. Some of them have Bluetooth and Wi-Fi connectivity. While hard-wired systems may be more reliable, wireless ones can be easily broken. Additionally, you should make sure that the speakers you’re using are wired to the PA system. Lastly, make sure to check the quality of the microphones and subwoofers. If you plan to record your show, you should make sure you have a sound-quality amplifier to keep your audience happy.
A PA system has a few different features. The speakers can be powered with an electric guitar, acoustic guitar, or a radio. The speakers can also be used for acoustic instruments and background break music. A PA system usually has two speakers, but two can cover a wider range. This way, it is more versatile. But, it does not have the flexibility to handle many instruments. You need two separate channels to connect your music and background noise.
Choosing a PA system with in-line volume controls is an important consideration. You need to ensure that the speakers have an appropriate level of gain and output. This can affect the sound quality of your performance. So, when purchasing a PA system, check its settings and make sure it works well. A good sound system should not be a costly investment. It should be well-built and functional. And make sure you check the cables and the wiring.
Adding a PA system to your venue can help increase the volume of your event. You can use a microphone to broadcast your message. The microphone can also be used to play music. For an audience, a PA system is a perfect solution for concerts, weddings, and other events. It can be the most effective way to promote your brand. Once you’ve installed your system, you’re ready to use it. It can also be used for public presentations.