Best Security Products Shop in Bangladesh With Best Price
ZKTeco iClock9000-G (GPRS / 3G) Time Attendance Terminal || Hundure RAC-960PEF Fingerprint Time Attendance & Access Controller || Ahuja HBM-60CC Condenser, Cardioid Headband Microphone || Security Mirror || Parking Mirror || ZKTeco uFace800 Plus Face Detection Multi-Biometric T&A and A&C Terminal || Soft Tag (Swing) RF 8.2Mhz For EAS || TOA WM-5325 With WT-5810 UHF Wireless Microphone Sets
Show ER-66 Megaphone (Hand Mike) 25W with Built-in Siren
- Brand: Show
- Model : ER-66
- Power Output: 25 watt
- Built in Siren
- Comes with Strap and handgrip
- Uses 8pc C size batteries
৳ 4,500.00
EAS System AM Security Sensor Anti-theft Gate in Uttara, Dhaka | Best Price
- Product Name: am 58khz gateway system
- Frequency: 58khz
- Color: Grey/white/customized
- Material: Abs
- Size: 143*37*9cm
- Detection Range: 80~200cm
- Electronic Board: DSP Board
- Function: Anti-Theft EAS System Antenna
Call for PriceEpowsens Retail eas rf alarm antenna anti-theft security systems in Uttara, Dhaka-Bangladesh
- Name: rf system for garment
- Color: Ivory/Customized
- Frequency: 8.2mhz
- Dimension: 160*39*10cm
- Material: titanium alloy aluminum
- Function: ABS
- Packing: 1set/carton
Call for PriceZEBRA ZXP Series 3 ID Card Printer
ZEBRA ZXP Series 3:
- Resolution: 300 dpi
- Color Print Speed: 180 Cards/Hour
- Monochrome Print Speed: 700 Cards/Hour
- Edge-to-Edge Printing on CR-80 Media
- 100-Card Covered Feeder & 45 Card Output
- Print Touch NFC Tag
- Kensington Security Lock Slot
- Optional Upgrades are Available
- USB 2.0 Connectivity
৳ 75,000.00ZEBRA ZXP Series 3 ID Card Printer
৳ 75,000.00ITC TI-5006S 500W 6 zone mixer amplifer with MP3, 4 mic inputs, 2 line inputs
ITC TI-5006S Bangladesh
TI -1206S/TI-2406S/TI-3506S/TI-5006S * 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .* 6 Channel Partition output, and partition volume independent control.* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.* Mp3 decoding module supports usb / sd / bluetooth / fm radio playback function. With the MP3 remote control, support power off memory function, MIC recording function.* When the alarm generator starts, background music will be closed and6 partition output will automatically open to maximum output volume.* Built in 24V DC power input.* Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled .* T-216 partition control microphone can remotely control partition output, and it can be cascaded up to 6 units.* Audio input with independent control on tone control and total volume control.* A variety of indicator lights (signal, the top of the roof, to protect the LED indicator)* Using fan forcible cooling structure, allowing the machine to work for a long time.* There are 5 priority functions:The first level EMC priority: when input the EMC alarm signal, all the sound source will be turn off, and the 6 Channel partition output will automatically open.Second level: tel /rem mic override mic1-4, line1-2 and bell tone.Third level: built-in alarm generator override bell sound, mic1-4, line1-2, 6 partition output will automatically open.Fourth level: built-in bell tone override mic1-4, line1-2.Fifth level: built-in mic1 override mic2-4, line1-2.* Constant voltage output: 70V, 100V, rated resistance output: 4-16 Ω .SpecificationsRear Panel TI-1206S/TI-2406S/TI-3506S/TI-5006S
Call for PriceITC T-4S240 RMS 4×240W Four Channel Power Amplifier, 100V/70V/4ohms
ITC T-4S240 Bangladesh
The 4 channel power amplifiers are designed for commercial and industrial public address
applications . With four separate amplifier in a single chassis and rated power ranges from
60W, 120W and 240W per channel which provides a wide selection to meet different size
sound system needs. The amplifier is design of rack mount type and T-4S60/T-4S120 are in
2U height while T-4S240 is in 3U height.
Balanced line inputs by phone jack, 70V, 100V and 4-16ohm speaker outputs for each channel
by phoenix types are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, peak and protection.
* 4 separate amplifier into one chassis
* Rack mount amplifier in 2U( T-4S60/T-4S120) and 3U(T-4S240) types
* Rated power from 60W, 120W to 240W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel by phoenix types
* Isolated transformer for human safety operation
* Balanced phone jack type line input for each channel
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, peak, and protection
* Excellent device of radiator cooling fanner that ensures working effectively
Optional
* DC 24V input available on less than but not included 240W models
Call for PriceITC T-2S60 RMS 2×60W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S60 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for PriceITC T-2S120 RMS 2×120W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S120 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for PriceITC T-2S350 RMS 2×350W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S350 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for PriceITC T-2S500 RMS 2×500W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S500 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for PriceITC T-6240 Pre-Amplifier
ITC T-6240 Bangladesh
8 channel pre-amplifier, 8 unbalanced inputs and outputs, 1 mic input and 2 fire alarm inputs
The T-6240 is a public address pre-amplifier with eight line level inputs, one unbalanced MIC input and two EMC(priority) level inputs. Each of the eight input channels can be selected via front panel push buttons for use with the MIC input, in this way the T-6240 can be used to page individual channel.
Call for PriceITC T-6240 Pre-Amplifier
Call for Price
ITC VA-6200MA Voice Alarm Evacuation System Controller, 500W, can support 8 zones
ITC VA-6200MA In bangladesh
ITC VA-6200MA Intelligent Public Address and Voice Alarm system is the organic combination of computer network technology, communication technology, information technology and so on. It is a combination of related voice alarm system. Through the PC management software, you can do system function customization and control, automatic completion of the system physical zone status monitoring and management, automatic completion of the terminal equipment monitoring and management. It is mainly used in intelligent residential quarters, shopping malls, shopping centers, and buildings such as voice alarm and background music.
Call for Price
Epowsens
Established in 2005, Epowsens, a leading enterprise focuses on RF/AM soft label, RF/AM hard tag, RFID inlay/label, EAS/RFID system, etc. With over 10 years of experience, hundreds of employees and 1.2 billion pieces of annual production quantity, our products has cover a large share of the worldwide market. Our company’s amount of annual exports is 5-7 millions USD.
The core of our service is responsibility. We keep it as our culture, making our industry protects the retailers in the world.
EAS (Electronic Article Surveillance)–A security system for preventing theft in retail stores that uses disposable RF /AM label or reusable RF/AM hard tags attached to the merchandise. An alarm is triggered when walking through detection antenna gate at the store exit if a disposable tag was not deactivated or a reusable tag was not removed at the checkout counter.
epowsens Bangladesh
UHF Inlay HF Inlay RFID UHF label RFID HF Label RFID Tag
RF Label Hard Tag Bottle Tag Ink Tag Detacher Am Label Deactivtor Eas System Safer Pin Lanyard Alarm Tag
EAS anti-theft alarm security system Price in Bangladesh
Epowsens Retail eas rf alarm antenna anti-theft security systems in Uttara, Dhaka-Bangladesh
Retail eas rf alarm antenna anti-theft security systems in Uttara, Dhaka
How EAS Systems Working?
How Anti-shoplifting Devices Work? How EAS devices can detect security tags and security labels?
The most effective anti-shoplifting tools these days are tag-and-alarm systems, better known as electronic article surveillance (EAS) systems. Separately, these are good options. Used together, experts say, they’re almost unbeatable. EAS is a technology used to identify articles as they pass through a gated area in a store. This identification is used to alert someone that unauthorized removal of items is being attempted. According to the Association of Automated Identification Manufacturers, over 800,000 EAS systems have been installed worldwide, primarily in the retail arena. EAS systems are useful anywhere there is an opportunity for theft of items of any size. Using an EAS system enables the retailer to display popular items on the floor, where they can be seen, rather than putting them in locked cases or behind the counter.
New EAS technologies are being produced — not only to reduce shoplifting — but also to help increase sales, lower labor costs, speed inventory, improve stockroom logistics and, one day, to replace inventory record-keeping. But for now, we’ll stick to the role of EAS in battling shoplifting in your imaginary store!
Three types of EAS systems dominate the retail industry. In each case, an EAS tag or label is attached to an item. The tag is then deactivated, or taken from an active state where it will alarm an EAS system to an inactive state where it will not flag the alarm. If the tag is a hard, reusable tag, a detacher is used to remove it when a customer purchases the item it’s attached to. If it’s a disposable, paper tag, it can be deactivated by swiping it over a pad or with a handheld scanner that “tells” the tag it’s been authorized to leave the store. If the item has not been deactivated or detached by the clerk, when it is carried through the gates, an alarm will sound.
The use of EAS systems does not completely eliminate shoplifting. However, experts say, theft can be reduced by 60 percent or more when a reliable system is used. Even when a shoplifter manages to leave the store with a tagged item, the tag still must be removed — something that is no longer as easy as it once was. For example, some EAS tags contain special ink capsules, which will damage the stolen item when forcibly, and illegally, removed. (This type of device is known in the industry as benefit denial — we’ll discuss it more later!). Other popular EAS components today include source tagging, whereby an inexpensive label is integrated into the product or its packaging by the manufacturer.
The type of EAS system dictates how wide the exit/entrance aisle may be, and the physics of a particular EAS tag and technology determines which frequency range is used to create a surveillance area. EAS systems range from very low frequencies through the radio frequency range (see How Radio Scanners Work). These EAS systems operate on different principles, are not compatible and have specific benefits and disadvantages. (That’s why the Consumer Products Manufacturers Association, Inc. is encouraging a “tower-centric” EAS approach that can “read” multiple tag technologies rather than the “tag-centric” models that exist today.