TOA WM-5325 With WT-5810 UHF Wireless Microphone Sets
TOA WM-5325:
- Frequency Range 576 – 865 MHz*1, UHF
- Channel Selectable 64 channels*1
- Maximum Input Level -14 dB to -29 dB* (Audio level control: Min. to Max.)
- Battery LR6 (AA) or WB-2000 (Ni-MH battery)
- Finish Resin, coating (change other’s)
- Dimensions 62 (W) x 102.5 (H) x 23 (D) mm
- Weight 90 g (with battery)
- Accessories Screw driver, Storage case, Neck Strap
- Option Ni-MH battery: WB-2000
- Origin: Japan
৳ 35,000.00TOA WM-5225 With WT-5810 UHF Wireless Microphone
TOA WM-5225:
Price: ৳ 29,800 Brand: TOA Model: WM-5225 Item: UHF Wireless Microphone Contact No: 01407-555777, 01789-636363 Status: In Stock Warranty: One Year Frequency Range: 576 – 937.5 MHz*, UHF
Channel Selectable: 64 channels (the number of channels may differ from country to country)
RF Carrier Power: Less than 50 mW (Factory preset 10 mW ERP)
Tone Frequency: 32.768 kHz
Oscillator: PLL synthesized
Maximum Input Level: 126 dB SPL
Maximum Deviation: ±40 kHz
Audio Frequency Response: 100 Hz – 15 kHz
Dynamic Range: 95 dB or more (with WT-5800)
Origin: Japan৳ 35,000.00TOA WM-5225 With WT-5810 UHF Wireless Microphone
৳ 35,000.00Lanyard Loop and Pin – 6.5″ (170mm)
Lanyard Loop and Pin, Lanyard Pin
The Lanyard Loop and Pin makes it possible to attach security tags to a wider variety of merchandise where one is unable to insert a traditional pin.
Call for PriceLanyard Loop and Pin – 6.5″ (170mm)
Call for PriceEAS Lanyard Pencil Handbag AM Security Tag
Lanyard Pencil Tag:
- Product: lanyard pencil tag
- Type: Pencil tag
- Frequency: 58 KHz
- Used In: Eas AM system
Call for PriceEAS Lanyard Pencil Handbag AM Security Tag
Call for PriceAM Tag Detector | AM Tag Deactivator Pad
AM Tag Detector | AM Tag Deactivator Pad Bangladesh | AM Tag Recheck BD
The deactivator will detect 58KHz labels at a height of 12cm and deactivate 58KHz labels at a height of 10cm. It gives an audible signal if a label is not deactivated. The pad can also detect 58KHz AM hard tags ensuring that the hard tags are removed at the point of sale.
Call for PriceAM Tag Detector | AM Tag Deactivator Pad
Call for PriceAM Tag Tester | AM 58KHz EAS Handheld Detector
AM Tag Tester | EAS Handheld Detector
- Contactless detection
- Detection of forgotten AM labels and tags at the exit
- Detection distance is up to 15 cm for adhesive labels
- Lasts up to one month per charge
- Compatible with all 58 kHz tags and labels
- Battery low-level indication
- Audio and visual indication of tag detection
৳ 9,500.00RF Tag Tester | RF Tag Reader
RF Tag Tester
EAS RF Security Handheld Detector EAS Anti-theft Tester EAS Handheld Detector Tester For 8.2MHz RF Tags & Labels
Call for PriceRF Tag Tester | RF Tag Reader
Call for PriceRF Tag Opener
RF Tag Opener 5500GS
- Detacher (for hard tags)
- Compatible with most RF tags
- Lock for advanced security
- Durable, easy to use
- 5500GS
৳ 5,500.00RF Tag Opener
৳ 5,500.00ITC TI-5006S 500W 6 zone mixer amplifer with MP3, 4 mic inputs, 2 line inputs
ITC TI-5006S Bangladesh
TI -1206S/TI-2406S/TI-3506S/TI-5006S * 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .* 6 Channel Partition output, and partition volume independent control.* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.* Mp3 decoding module supports usb / sd / bluetooth / fm radio playback function. With the MP3 remote control, support power off memory function, MIC recording function.* When the alarm generator starts, background music will be closed and6 partition output will automatically open to maximum output volume.* Built in 24V DC power input.* Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled .* T-216 partition control microphone can remotely control partition output, and it can be cascaded up to 6 units.* Audio input with independent control on tone control and total volume control.* A variety of indicator lights (signal, the top of the roof, to protect the LED indicator)* Using fan forcible cooling structure, allowing the machine to work for a long time.* There are 5 priority functions:The first level EMC priority: when input the EMC alarm signal, all the sound source will be turn off, and the 6 Channel partition output will automatically open.Second level: tel /rem mic override mic1-4, line1-2 and bell tone.Third level: built-in alarm generator override bell sound, mic1-4, line1-2, 6 partition output will automatically open.Fourth level: built-in bell tone override mic1-4, line1-2.Fifth level: built-in mic1 override mic2-4, line1-2.* Constant voltage output: 70V, 100V, rated resistance output: 4-16 Ω .SpecificationsRear Panel TI-1206S/TI-2406S/TI-3506S/TI-5006S
Call for PriceITC T-4S240 RMS 4×240W Four Channel Power Amplifier, 100V/70V/4ohms
ITC T-4S240 Bangladesh
The 4 channel power amplifiers are designed for commercial and industrial public address
applications . With four separate amplifier in a single chassis and rated power ranges from
60W, 120W and 240W per channel which provides a wide selection to meet different size
sound system needs. The amplifier is design of rack mount type and T-4S60/T-4S120 are in
2U height while T-4S240 is in 3U height.
Balanced line inputs by phone jack, 70V, 100V and 4-16ohm speaker outputs for each channel
by phoenix types are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, peak and protection.
* 4 separate amplifier into one chassis
* Rack mount amplifier in 2U( T-4S60/T-4S120) and 3U(T-4S240) types
* Rated power from 60W, 120W to 240W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel by phoenix types
* Isolated transformer for human safety operation
* Balanced phone jack type line input for each channel
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, peak, and protection
* Excellent device of radiator cooling fanner that ensures working effectively
Optional
* DC 24V input available on less than but not included 240W models
Call for PriceITC T-2S60 RMS 2×60W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S60 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for PriceITC T-2S120 RMS 2×120W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S120 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for Price
