Jovision JVS-XD2608-FC10V 8CH XVR
• TVI/AHD/DVR/NVR/CVI 5-in-1 function.
• Support multi-mode input
• Supports various mobile phone monitoring (iPhone Android).
• Support multiple web browsers (IE / Chrome / Firefox / Safari).
• Support VGA,HDMI output at the same time.
• Support STVI function.
• Support coaxial audio
• support multi-languauge৳ 6,800.00Jovision JVS-XD2608-FC10V 8CH XVR
৳ 6,800.00JOVISION JVS-XD2616-HD10V 16CH XVR
1. Support 16ch 1080N non real-time encoding;
2. Support AHD, TVI,CVI, CVBS, IP video input;
3. HDMI/VGA simultaneous video output;
4. 1U Case, 1 SATA (Up to 6TB);
5. 1*10/100Mbps auto-sensing Ethernet port, RJ45 port；
6. Automatic networking support, a key to add equipment;
7. Cloud services, P2P, alarm information push to phone;
8. Support remote access, support ARSP;
9. Mobile phone remote monitoring (iOS, Android);
10. Multi browser access (IE, Chrome, Firefox, Safari);
11. Perfect protection circuit, unique triple watchdog function;
12. Support WEB, CMS, VMS, Cloudsee Platform;৳ 8,800.00JOVISION JVS-XD2616-HD10V 16CH XVR
৳ 8,800.00Jovision JVS-XD2832-HE20K 32CH 5-in-1 XVR
- Support H.264+（Quasi H.265） encoding, ultra-low bit rates, compatible with H.264 surroundings;
- Support VGA, HDMI HD output simultaneously;
- Support various mobile monitoring (IOS, android);
- Support UTC, control signal& video stream transmit through one single coaxial;
- Support AHD/TVI/CVI/CVBS/IP five signals;
- Support multi – languages;
- Support IVP;
- • Third-party network cameras supported.
৳ 20,500.00Jovision JVS-XD2832-HE20K 32CH 5-in-1 XVR
৳ 20,500.00Jovision JVS-S08-6P-65W 6Port PoE Network Switch
- Comply with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards.
- Support IEEE 802.3af/at standard, compatible with PD that supports IEEE 802.3af/at.
- Supports common switch, automatic AI detection, and remote transmission (combined function) in 2-file mode.
- Provides 6 10/100m adaptive POE power ports and 2 uplink 10/100 adaptive non-power RJ45 ports.
- All ports support the Auto MDI/MDI-X function.
- Supports IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
- All ports have wire-speed forwarding capability.
- Supports MAC address self-learning and aging.
- Full metal casing, full load 90W.
- Plug and play.
৳ 4,650.00Jovision JVS-S10-8P 8Port PoE Network Switch
• Follow IEEE 802.3 Ethernet and IEEE 802.3u fast Ethernet protocol standard;
• Support for IEEE802.3at/af standard, compatible with IEEE802.3at/af for power equipment (PD)
• Support common switch mode / VLAN isolation 150m transmission two modes
• Provide 10 10 / 100m adaptive RJ45 ports, in which ports 1 to 8 support PoE power supply;
• All ports support automatic flip (Auto MDI/MDI-X) functionality
• Support IEEE802.3X full-duplex flow control and Backpressure semi-duplex flow control
• All ports have line speed forwarding capability
• Autonomous Learning and Aging supporting MAC address
• Full metal housing, full load 120W৳ 6,000.00Jovision JVS-S10-8P 8Port PoE Network Switch
৳ 6,000.00Jovision JVS-S19-16P 16Port PoE Network Switch 2 Uplink 1SFP Port
JVS-S19-16P 16Port PoE Network Switch 2 Uplink & 1 SFP Port
The JVS-19-16P 100-megabit standard PoE switch provides eight 10 / 100M adaptive RJ45 ports, and ports 1 ~ 6 have PoE power supply, which can be used as Ethernet power supply equipment. All ports can automatically detect and identify devices that meet IEEE 802.3at/af standards and power them via network lines. Support general
৳ 13,500.00Jovision JVS-N813-K1 2.0MP IR camera
- Resolution 1920×1080@25fps;
- 4 high power IR LEDs;
- SNE3.0 night vision adjustment black technology;
- Support OSD large font function, can adjust OSD fonts;
- Support OSD to set the location separately from time;
- Support ROI region of interest to enhance coding, enhance the exposure of the region of interest;
- Support video adjustment, screen flip, screen image, fill light brightness self-adjustment, software wide dynamic function;
Call for PriceJovision JVS-N813-K1 2.0MP IR camera
Call for PriceJovision JVS-N515-HY 5.0MP Bullet Camera
- Price: 5,500
- Warranty: One Year
- Call: 01407-555777
- Jovision JVS-N515-HY Price in BD
- Resolution 2592×1944@20fps
- Ingress protection IP67
- 4Pcs Array IR LEDs, IR Rand up to 50m.
- Supports CloudSEE APP on iOS/Android
৳ 5,500.00৳ 6,000.00Jovision JVS-N515-HY 5.0MP Bullet Camera
৳ 5,500.00৳ 6,000.00ITC TI-5006S 500W 6 zone mixer amplifer with MP3, 4 mic inputs, 2 line inputs
ITC TI-5006S Bangladesh
TI -1206S/TI-2406S/TI-3506S/TI-5006S * 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .* 6 Channel Partition output, and partition volume independent control.* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.* Mp3 decoding module supports usb / sd / bluetooth / fm radio playback function. With the MP3 remote control, support power off memory function, MIC recording function.* When the alarm generator starts, background music will be closed and6 partition output will automatically open to maximum output volume.* Built in 24V DC power input.* Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled .* T-216 partition control microphone can remotely control partition output, and it can be cascaded up to 6 units.* Audio input with independent control on tone control and total volume control.* A variety of indicator lights (signal, the top of the roof, to protect the LED indicator)* Using fan forcible cooling structure, allowing the machine to work for a long time.* There are 5 priority functions:The first level EMC priority: when input the EMC alarm signal, all the sound source will be turn off, and the 6 Channel partition output will automatically open.Second level: tel /rem mic override mic1-4, line1-2 and bell tone.Third level: built-in alarm generator override bell sound, mic1-4, line1-2, 6 partition output will automatically open.Fourth level: built-in bell tone override mic1-4, line1-2.Fifth level: built-in mic1 override mic2-4, line1-2.* Constant voltage output: 70V, 100V, rated resistance output: 4-16 Ω .SpecificationsRear Panel TI-1206S/TI-2406S/TI-3506S/TI-5006S
Call for PriceITC T-4S240 RMS 4×240W Four Channel Power Amplifier, 100V/70V/4ohms
ITC T-4S240 Bangladesh
The 4 channel power amplifiers are designed for commercial and industrial public address
applications . With four separate amplifier in a single chassis and rated power ranges from
60W, 120W and 240W per channel which provides a wide selection to meet different size
sound system needs. The amplifier is design of rack mount type and T-4S60/T-4S120 are in
2U height while T-4S240 is in 3U height.
Balanced line inputs by phone jack, 70V, 100V and 4-16ohm speaker outputs for each channel
by phoenix types are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, peak and protection.
* 4 separate amplifier into one chassis
* Rack mount amplifier in 2U( T-4S60/T-4S120) and 3U(T-4S240) types
* Rated power from 60W, 120W to 240W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel by phoenix types
* Isolated transformer for human safety operation
* Balanced phone jack type line input for each channel
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, peak, and protection
* Excellent device of radiator cooling fanner that ensures working effectively
Optional
* DC 24V input available on less than but not included 240W models
Call for PriceITC T-2S60 RMS 2×60W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S60 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for PriceITC T-2S120 RMS 2×120W Two Channel Power Amplifier, 100V/70V/4ohms
ITC T-2S120 Bangladesh
The 2 channel power amplifiers are designed for commercial and industrial public address
applications. With two separate amplifier in a single chassis and rated power ranges from
60W, 120W, 240W, 350W to 500W per channel which provides a wide selection to meet
different size sound system needs. The amplifier is designed of rack mount type and T-2S60/
T-2S120 are in 2U height while T-2S240/T-2S350/T-2S500 are in 3U height.
Both balanced and unbalanced line inputs for each channel make it selectable for installer,
balanced line outputs for each channel feed to another power amplifier as well as secure the
signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs
for each channel are convenient for installation when selection different speaker matching.
Master volume controls for each control are included. Complete protection includes over heat,
over load, clip & short circuit. Indications for power, signal, clip, protection and temp.
* 2 separate amplifier into one chassis
* Rack mount amplifier in 2U (T-2S60/T-2S120) and 3U (T-2S240/T-2S350/T-2S500) types
* Rated power from 60W, 120W, 240W, 350W to 500W per channel
* 70V, 100V and 4-16ohm speaker outputs for each channel
* Isolated transformer for human safety operation
* Balanced XLR type line input and unbalanced 1/4 inch XLR phone jack line input for each
Channel
* Balanced XLR type line outputs for each channel feed to another power amplifier
* Reliable protection of over heat, over load, clip & short circuit
* Indications for power, signal, clip, protection and temp
* Excellent device of radiator cooling fan that ensures working effectively
Optional
* DC 24V input available on less than but not included 350W models
Call for Price
